Paper 2 Que 20-25 Online Test

21.          Bead width of butt weld should be
2 to 3 T
3 to 5 T
¼ to ½ T
11/3 to 11/2 T 22.          On a fillet weld the pinctration requirements an
60 to 80% of the thickness of the base metal
100% of the thickness of the base metal
200% of the thickness of the base metal
25 to 50% of the thickness of the base metal 23.      In the fluorescent penetrant inspection
the defect will show up as a brilliant yellow-green
the defect will show up as a light yellow-green
the sound area will appear white
the defect will show up deep blue-violet 24.      In jacking of a/c
Main wheels are raised together
Nose wheel is raised 6” above the ground
Nose wheel hall which is raised for free movement of it
None is correct 25.      Centre drill is used to
make hole & reaming in one operation
make hole & counter sunk in one operation
make tapper hole
all Score = Correct answers:

If you find any incorrect question or answers in this test. Kindly write us in comments we'll correct it soon.Although we work hard to provide a high quality of test questions, www.dgcaquestionpapers.in does not guarantee the accuracy of the content or information that is provided on this site and will not take responsibility for any incorrect questions, answers, content and any form of errors. You can use this information solely at your own risk.

Loading