DGCA CAR 66 MODULE 7 P5,09. Pipes and Hoses. 10. Springs.11.Bearing 12. Transmissions 13. Control Cables.

DGCA CAR 66 MODULE 7 MAINTENANCE PRACTICE PART 5
(09. Pipes and Hoses. 10. Springs.11.Bearing 12. Transmissions 13. Control Cables.)

7.9 Pipes and Hoses 

• Bending and belling/flaring aircraft pipes;
• Inspection and testing of aircraft pipes and hoses;
• Installation and clamping of pipes.

7.10 Springs 
Inspection and testing of springs.

7.11 Bearings

• Testing, cleaning and inspection of bearings;
• Lubrication requirements of bearings;
• Defects in bearings and their causes.

7.12 Transmissions 

• Inspection of gears, backlash;
• Inspection of belts and pulleys, chains and sprockets;
• Inspection of screw jacks, lever devices, push-pull rod systems.

7.13 Control Cables 

• Swaging of end fittings;
• Inspection and testing of control cables;
• Bowden cables; aircraft flexible control systems.

Loading